Replacing the toner modules – NEC 4650N User Manual

Page 93

Advertising
background image

Replacing the Toner Modules

87

MAINTAINING YOUR PRINTER

R

EPLACING

THE

T

ONER

M

ODULES

Replace each Toner Module when you start seeing print
quality problems such as light images or white streaks across
the page. The Operator Panel will display the TONER
EMPTY message when the toner level is getting low.

To order an NEC SuperScript 4650 Series Toner Module
contact your NEC printer dealer or see below. The black
replacement modules print approximately 10,000 pages. The
yellow, magenta, and cyan replacement modules print
approximately 6,000 pages each.

Follow these directions to replace the Toner Modules;

1.

Open the Front Cover (A).

2.

Pull out the Toner Module that needs replacing (B).

3.

Hold the new Toner Module horizontally and rock it left
to right three or four times. Then remove the protective
orange cover and tape (C).

4.

Insert the Toner Module into its corresponding slot and
close the printer (D).

note:

The starter Toner Modules that shipped with your

printer contain less toner than replacement modules.

A

B

C

D

To order new Toner Modules

800-632-2326

Toner Module

Order #

Black Toner Module

20-200

Yellow Toner Module

20-201

Magenta Toner Module

20-202

Cyan Toner Module

20-203

Advertising
This manual is related to the following products: