Replacing the belt cartridge, Maintaining your printer – NEC 4650N User Manual
Page 97
Replacing the Belt Cartridge
91
MAINTAINING YOUR PRINTER
R
EPLACING
THE
B
ELT
C
ARTRIDGE
Order Number 20-205
1.
Turn off the printer (A).
2.
Open the Front and Top Covers (B).
3.
Flip up the Lock Levers to release the Belt Cartridge (C).
4.
Pull the old Belt Cartridge straight up and discard it (D).
5.
Remove the black wrapper from the new Belt Cartridge
and pull out the two tension release pins as shown (E).
WARNING!
Do not touch the green material on the Belt
Cartridge. It is easily scratched.
6.
With the flat side of the Belt Cartridge facing the front,
insert it straight into the guide slots in the lock levers.
The white gear on the cartridge goes to the right.
Do not use force (F).
7.
Flip down the Lock Levers (G).
8.
Close the Front and Top Covers.
9.
Reset the Operator Panel to make sure the consumables
usage information is current (H). Follow these steps:
a. Press Online.
OFFLINE
appears on the display.
b. Press Menu.
PRINT FORM
appears on the display.
c.
Press Next until
USAGE STATUS
appears on the
display, and then press Select.
d. Press Next until
BELT REPLACE?
appears on the
display, and then press Select.
e. When the panel displays
CONFIRM
, press Select.
f.
Press Menu. Press Online.
A
B
C
D
E
F
G
Power
Warning
Online
Menu
OnLine
Data
OHT
Label
Feed
Item
Media
Previous
Next
Select
H