NEC 4650N - Manual (Page 125)

119
APPENDIX D
MOVING YOUR PRINTER
This appendix gives you directions on how to safely move or
ship your printer. Please follow these instructions carefully.
Failure to do so may result in damage to the printer.
M OVING THE P RINTER L OCALLY
To move the printer locally means that it can either be carried
by two people or moved on a cart to its new location. Follow
these steps:
1. Turn the printer off and allow it to cool for 15 minutes.
2. Remove any cables, plugs, and paper trays.
3. Remove the optional Paper Tray 2 Unit if attached.
(Reverse the directions given on page 28.)
4. Open the Top Cover (A).
5. Open the Lock Tabs inside (B).
6. Carefully remove the Fuser Oil Bottle (C).
note: Hold a sheet of paper under the Fuser Oil Bottle
so no oil drips back into the printer.
7. Place the Fuser Oil Bottle in an oil-proof container, such
as a plastic bag, until you are ready to reinstall it.
8. Use the Oil Syringe provided with your printer (or an eye
dropper) to remove any excess oil from the fuser area.
Deposit in plastic dish and discard (D).
9. Clean out any extra oil residue with several paper towels
(E)
. If you are also shipping the printer, fill the space
normally occupied by the Oil Bottle with paper towels to
absorb any residual oil during shipment.
A
B
C
D
WARNING! The printer must be kept level
at all times unless ALL oil is removed.
E