NEC 4650N - Manual (Page 96)

90 SuperScript 4650 Series — User’s Guide
C LEANING THE B ELT C ARTRIDGE
The Belt Cartridge is sensitive to bright light and touch.
Always wrap it in a soft dark cloth until you are ready to
clean or install it. Use a clean soft cloth to clean the parts.
1. Turn off the printer and unplug it.
2. Open the Front and Top Covers of the printer (A).
3. Release the Lock Levers (B) and carefully remove the Belt
Cartridge (C).
4. Clean any toner or paper dust from the Belt Cartridge.
5. Remove the small Cleaning Brush from inside the front
of the printer (D).
6. Turn the Belt Cartridge so that the handle is facing away
from you.
7. Use the brush to gently clean the wire inside the end of
the Belt Cartridge. Do not press hard on the wire (E).
8. Using a dry cloth, clean any toner buildup from around
the Cleaning Blade.
9. Reinstall the Belt Cartridge (F)and secure the Lock Levers
(G)
.
10. Return the Cleaning Brush to its holder and close the Top
and Front Covers (H)
Cleaning Blade
A B C D
E F G H
note: Opening the Front Cover
is necessary in order to make room
for the Belt Cartridge.
Do not touch edge!