Connection to digital tv (ypbpr) – NEC NHD-3000PVR User Manual
Page 14
Connect the Audio Cables
Connect the Video Cables
12
Installation
Connection to Digital TV (YPbPr)
05
Connect an audio cable between the L/R Audio output jacks of the STB and the L/R Audio input jacks of
the digital TV or digital audio amplifier. (Refer to page 18)
Connect a video cable between the Component video output(Y : Green, Pb : Blue, Pr : Red) jacks of the
STB(Set Top Box) and the Component input jacks on the Digital TV according to corresponding colour.
On the Video Out Mode, select YPbPr as Video Output Type and select one of 1080i, 720p, 576p, 576i
as Video Output Resolution according to your digital TV.
NOTE
By pressing the remote, V-OUTPUT (2 buttons), you will be able to change the output ‘YPbPr’ and
‘RGB’. (YPbPr selection is usually used for Component Input, while RGB selection is usually used for
PC/HDMI Input)
By pressing the remote, V-FORMAT (2 buttons), you will be able to change the format ‘1080i’,
‘720p’, ‘576p’, ‘576i’.
< Digital TV >