NEC NHD-3000PVR - Manual (Page 28)

26
Timeshift Control
On Screen Display
07
Press T.SHIFT button to start timeshift.
When Timeshift is ON, you can see a logo on the left ( ). If you want to remove this logo, press
EXIT button.
Timeshift has to be at least about 1 minute recording.
Timeshift runs about 1 hour.
Timeshift is unavailable during recording.
If recording is started, the timeshift will be automatically terminated.
Edit function is unavailable during timeshift.
Playback of recorded program doesn’t work during timeshift. Stop timeshift for playback recorded program.
Channel change is unavailable during timeshift. Stop timeshift for Channel change.
In case of starting timeshift using T.SHIFT button, it takes 4~10 seconds starting timeshift, and
display blinks shortly as starting.
To stop current channel recording intermediataly press STOP button, then press OK button.
If timeshift function are executed for 12 hours without any interruption by user, it will automatically
quit and go to live mode.
Since timeshift runs on the last 1 hour, the captured picture at P.LIST will be different if timeshift has
run more than one hour.
Start Timeshift : Press PAUSE button or T.SHIFT button. The timeshift logo will be displayed during timeshift.
Stop Timeshift : Press STOP[ ] button (follow the instruction from OSD), then press OK button.
Available functions during Timeshift :
1.Starting point of timeshift : START[ ] button.
2.Ending point of timeshift : END[ ] button.
3.SCAN : FF[ ] button or REW[ ] button.
4.Slow Motion : Press PLAY/SLOW[ ] button during playback state.
5.Smart Skip : SKIP or SKIP button. (Skip time can be set in MENU, see page 49)