NEC NHD-3000PVR - Manual (Page 31)

07
29
On Screen Display
Show the Program List.
1. Press P.LIST button to playback a recorded program.
2. Use , button to select a program.
3. Press OK button to playback the selected program.
4. If new program to be played is same as the previously played one, it will play at the position where
you were watching. (Resume function)
5. Press button to display options. The options will be displayed as shown above.
Play In Main : Play the selected program in main window.
Play In PIP : Play the selected program in PIP.
Rename : Rename the selected program. (see page 30)
Delete : Delete the selected program.
Program List
If a program in main window is recorded, then an image displayed in main window is captured and
used as a thumbnail of the recorded program in Program List. If a program in main window is different
from the program under record, which may be the case of timer record, then a still image cannot be
captured. In this case, there will be no thumbnail for the recorded program at first. However, once the
recorded program is played, a still image will be captured and used as a thumbnail of the recorded program.
There will be no icon, if a recording is done less than 1 minute.
The thumbnail picture will be in BLACK picture if V.FORMAT button is changed to another resolution.
If you press SNAP button while program playback, the thumbnail picture will be changed to that scene.
To exit immediately, press P.LIST button.
Press EXIT button to switch to previous step on the menu screen.