NEC NHD-3000PVR - Manual (Page 34)

32
EDIT Control (Repeat, Cut, Split)
On Screen Display
07
Control Repeat, Cut & Split.
If a cut needs to be done in the beginning / at the end of the program, it may be used a SPLIT function,
then delete the unwanted program.
If you want to do EDIT operation more precisely, use DRAG+ and DRAG- button during ‘slow motion’
or ‘pause’ operation.
EDIT works only during Playback mode and provide three functions. To enter into EDIT function,
press REC/EDIT button during playback mode.
MARK has to be used before the operation of these functions. REPEAT/CUT requires two MARKs.
SPLIT requires one MARK.
Repeat : Repeat area can be set using MARK, DRAG+, and DRAG- buttons. After setting the repeat
area, press REC/EDIT button again, then REPEAT, CUT, SPLIT options will shown. Select REPEAT
and press OK button, then repeat function starts to work.
Repeat cancel : Select REPEAT and press OK button again. Then repeat function is canceled and
normal playback operation will work. Another way of canceling repeat operation is just pressing
MARK button or REC/EDIT button twice.
Cut : Area to be cut can be set using MARK, DRAG+, and DRAG- buttons. After setting the cut area,
press REC/EDIT button, select CUT, then press OK button. Then selected area will be cut.
Split : Pick a position where you want to split original program into two programs, and press
REC/EDIT button, select SPLIT, then press OK button. Then the original program will be split into
two programs at the marked position.