NEC NHD-3000PVR - Manual (Page 19)

Connect the Audio Cables
Connect the Video Cables
17
Connection to Analog TV (Composite/S-Video) 05
Installation
Connect an audio cable between the L/R Audio output jacks of the STB and the L/R Audio input jacks of
the analog TV.
Connect a composite cable between the Video output jack of the STB and the Video input jack of the
analog TV. Or, connect an S-Video cable between the S-Video output jack of the STB and the S-Video
input jack of the analog TV. You can connect either composite Video or S-Video cable. When connecting
using Composite Video or S-Video, please ensure to select 576i of the set top box, by pressing
V.FORMAT button on the remote.
NOTE
By pressing the remote, V-OUTPUT (2 buttons), you will be able to change the output ‘YPbPr’ and
‘RGB’. (YPbPr selection is usually used for Component Input, while RGB selection is usually used for
PC/HDMI Input)
By pressing the remote, V-FORMAT (2 buttons), you will be able to change the format ‘1080i’,
‘720p’, ‘576p’, ‘576i’.
< Analog TV >
If you use Composite/S-VIDEO connection, you must select 576i format. Otherwise
all of the OSD (On Screen Display) will not function, including MENU, MARK, etc.