NEC NHD-3000PVR - Manual (Page 18)

Connect the Audio Cables
Connect the Video Cables
16 Installation
Connection to HDMI/DVI PC Monitor 05
Connect an audio cable between the L/R AUDIO output jacks of the STB and the external speakers
that contain a sound amp. (Purchase separate jacks for PC speakers.)
Connect HDMI/DVI jack of the STB to the HDMI/DVI jack of the PC monitor. In regard to the Video Out
Mode, select one of 1080i, 720p, 576p according to Video Output Resolution of your monitor. (Purchase
HDMI-to-DVI adapter.)
NOTE
By pressing the remote, V-OUTPUT (2 buttons), you will be able to change the output ‘YPbPr’ and
‘RGB’. (YPbPr selection is usually used for Component Input, while RGB selection is usually used for
PC/HDMI Input)
By pressing the remote, V-FORMAT (2 buttons), you will be able to change the format ‘1080i’,
‘720p’, ‘576p’, ‘576i’.