Hdmi audio – NEC NHD-3000PVR User Manual
Page 45
43
HDMI Audio
Audio / Video
09
Control HDMI audio output.
1. Press MENU button.
2. Use
,
button to highlight
icon, then press OK.
3. Use
,
button to highlight HDMI Audio , then press OK.
4. Press
,
button to make a choice, then press OK.
Auto : If the broadcaster is broadcasting PCM/MPEG, the Digital OUT will be PCM. If the broadcaster
is broadcasting Dolby Digital, the Digital OUT will be Dolby Digital.
PCM : Whatever the broadcaster is broadcasting (PCM/MPEG or Dolby Digital), the Digital OUT will
be at PCM.
DISABLE : Select this, in order to have Digital Audio OUT in Dolby Digital for using external amplifier
at below conditions.
The TV digital audio support only PCM, and HDMI cable is used.
The broadcaster is broadcasting Dolby Digital.
When you connect using HDMI cable, the digital audio in the TV is detected. So if it detects PCM,
then the Digital OUT will be at PCM too. If it detects Dolby Digital, then the Digital OUT will be at
Dolby Digital too.
Press MENU button to exit the menu screen.
Press EXIT button to switch to previous step on the menu screen.