NEC NHD-3000PVR - Manual (Page 42)

Channel Duplication 08
40 Channel
Select Channel Duplication Option.
1. Press MENU button.
2. Use , button to highlight icon, then press OK.
3. Use , button to highlight Channel Duplication then press OK.
4. Press , button to make a choice, then press OK.
Channel Duplication function is to decide if all the duplicated physical channel for the same logical
channel are listed in ‘Channel List’ or not.
When identical logical channel from multiple physical channels are broadcasted, all those physical
channels are listed in Channel Edit menu. However, Channel List will show only one physical channel
or all those physical channels according to Channel Duplication option.
If Channel Duplication Disable is selected, only one superior channel is automatically detected and
added in Channel List. The rest of inferior channels are not added in Channel List.
If Channel Duplication Enable is selected, all the duplicated physical channel are added in Channel
List. In this case there may be repetition of channel number if identical logical channel from multiple
physical channels are broadcasted.
Though all the rest of inferior physical channels are not added in Channel List by selecting Channel
Duplication Enable, you can add any channel that is automatically deleted from Channel List by adding
the channel in Channel Edit menu.
Disable : Show one logical channel in Channel list.
Enable : Show all the duplicated logical channel in Channel List.
Press MENU button to exit the menu screen.
Press EXIT button to switch to previous step on the menu screen.