NEC NHD-3000PVR - Manual (Page 58)

56 System
11 New Password
Change the 4-digit password.
1. Press MENU button.
2. Use , button to highlight icon, then press OK.
3. Use , button to highlight NEW PASSWORD icon, then press OK.
4. Enter password to proceed.
5. Enter new password and make a confirmation using number keys on the remote controller.
The factory default password is 0-0-0-0.
For any reason, if you forget the password, Press MENU, CC, 3,6,9 button sequentially, then the
password will be back to ‘0000’ again.
When the program rating exceeds the level set on this menu, you will see the OSD above and audio
and video will be blocked. Enter password to watch the program. The pass state will be valid until power is off.
Press MENU button to exit the menu screen.
Press EXIT button to switch to previous step on the menu screen.