National Instruments Graphical User Interface Ultiboard - Manual (Page 260)

Appendix A Menus and Commands
© National Instruments Corporation A-19 NI Ultiboard User Manual
Tools»Equi-space Traces
Use to equally space selected traces. Refer to the Equi-Spacing Traces
section of Chapter 5, Working with Traces and Copper , for more
information.
Tools»Change Shape
Use to substitute a part from the database for the current selected part. Refer
to the
Replacing Parts section of Chapter 4, Working with Parts , for more
information.
Tools»Update Shapes
Use if you loaded Ultiboard V. 5 files into Multisim and plan to use 3D.
This command adds the necessary 3D information to the footprints in the
file.
Tools»Highlight Selection in Multisim
Highlights a selected part in Multisim. Refer to the Cross-probing section
of Chapter 4, Working with Parts , for more information.
Tools»Capture Screen Area
You can take a screen capture of a selected area. Refer to the Capturing
Screen Area section of Chapter 8, Preparing for Manufacturing/Assembly ,
for more information.
Tools»View 3D
Displays the design in 3D mode. Refer to the Viewing Designs in 3D
section of Chapter 9, Viewing Designs in 3D , for more information.
Tools»View 3D Position
This is only available when viewing the design in the 3D mode. Refer to the
Manipulating the 3D View section of Chapter 9, Viewing Designs in 3D , for
more information.
Tools»Show or Hide Height
Shows or hides the height of selected objects in 3D mode. This is only
available when viewing the design in the 3D mode. Refer to the
Showing
an Object’s Height section of Chapter 9, Viewing Designs in 3D , for more
information.