National Instruments Graphical User Interface Ultiboard - Manual (Page 53)

Chapter 1 User Interface
© National Instruments Corporation 1-37 NI Ultiboard User Manual
Bus Group This is the bus group in which the net is contained.
You can either enter the group name here, or use the
Group Editor. Refer to the
Working with the Group
Editor section of Chapter 3, Setting Up a Design , for
more information.
Differential
Pair This is the differential pair to which the net belongs.
Refer to the
Working with the Group Editor section of
Chapter 3, Setting Up a Design , for more information.
Shield Net Use the drop-down list to select the net to use to shield
this net. This feature is not available in all versions of
Ultiboard.
Shield Width Width of the net’s shield. This feature is not available
in all versions of Ultiboard.
Show
Ratsnest This is where you can show or hide the ratsnest for the
selected net. Refer to the
Working with Ratsnests
section of Chapter 4, Working with Parts , for more
information.
Max Via
Count This is the maximum number of vias allowed for the
selected net. You can use either the global settings, or
the group settings.
Via Drill
Diameter This is the diameter of the via pad’s hole.
Via Pad
Diameter This is the diameter of the total via pad.
Column Description