National Instruments Graphical User Interface Ultiboard - Manual (Page 265)

Appendix A Menus and Commands
NI Ultiboard User Manual A-24 ni.com
Right-drag Menu
When you select an area by dragging and releasing the right mouse button,
a context menu appears with the following selections.
Select all in rectangle
Selects all objects in the rectangle that you “drew” by dragging and
releasing the right mouse button.
Select objects on active layer
Selects only those objects in the rectangle that you “drew” by dragging and
releasing the right mouse button that are on the active layer as defined in
the Layers tab of the Design Toolbox.
Select objects on specified layers
Displays the Select layer(s) dialog box.
Complete the following steps to select the layers on which you wish to
select the objects:
1. Highlight the desired layers in the Select layer(s) dialog box and click
OK.
2. All items that are on the selected layers that appear within the rectangle
that you “drew” by dragging the right mouse button are selected.
Place Trace Menu
If you click the right mouse button when you are placing a trace a context
sensitive menu displays with the following options.
Cancel
Cancels the placement of the trace segment being drawn.
Widen
Widens the trace that you are drawing. Should be within Minimum Width
when set.
Narrow
Narrows the trace that you are drawing. Should be within Minimum Width
when set.