Radio Shack PRO-2051 - Manual (Page 22)

22
Beyond the Basics
deleting a stored frequency
To delete a stored frequency, select a channel, press 0, and
then press E.
Channels with no frequencies are automatically locked
out.
locking out channels
You can lock out reception of any channel so it is not
scanned during normal scanning. You can also restore the
channel to scanning whenever you wish.
Like conventional scanning, you can lock out reception of
unwanted traffi c. You can lock out up to 100 IDs. Press L/O
on the ID you want to lock out.
To restore all locked out IDs, hold down L/O for 2 seconds or
change the state code. If you fi nd an interesting ID you want
to continue listening to, press HOLD/RESUME. Press HOLD/
RESUME to resume scanning.
locking out a channel in hold mode
1. Press HOLD/RESUME and enter the channel number by
using the keypad, then press HOLD/RESUME.
2. Press L/O to lock out the channel. L/O appears on the
display.
locking out a channel in scanning mode
If the scanner keeps stopping on a particular channel due to
noise or frequent transmissions, you may want to keep that
channel from being received.
Wait until the scanner stops on the channel, then press L/O.
The scanner immediately resumes scanning because the
locked out channel is no longer in the scanning sequence.
Note Note