Radio Shack PRO-2051 - Manual (Page 30)

30
Beyond the Basics
frequency skip
If a particular frequency continues to interrupt search
scanning, it is possible to set the scanner to skip the
frequency.
To skip over a frequency, press L/O when stopping on the
frequency you want to skip or when in search hold mode.
You can program up to 100 skip frequencies. The 101st
skip frequency entered causes the fi rst skipped frequency
to unlock.
To restore a locked out/skipped channel.
1. Select the desired frequency by pressing e or d in search
hold mode.
2. Press L/O then press HOLD/RESUME. To restore all
skipped frequencies, press and hold L/O for 2 seconds in
search hold mode.
storing search frequencies
You can quickly store any frequency you fi nd during a search.
1 During search, press HOLD/RESUME. If you want to
change the frequency, press e or d to move up or down
one frequency step. Then press E. Or when the scanner
stops on the frequency you want to store, press E.
2. Select a bank you want to store by using the keypad.
The smallest empty channel number and the frequency
alternately appear on the display. If necessary, you can
also change the channel by pressing
e or d .
3. Press E.
If the frequency you want to store already exists in a
bank, you will hear an error tone and the other channel
location appears on the display.
Note Note
Notes Notes