Radio Shack PRO-2051 - Manual (Page 57)

57
Beyond the Basics
priority ID in List 1 will be checked before the priority in list 2,
etc.
This function does not work in LTR tracking.
Priority scan does not operate when priority IDs are
locked out.
moving between scan list memories
There are two ways to move through your scan list
memories.
1. Press HOLD/RESUME in the ID scan mode and press e or
d to move up or down.
2. Press HOLD/RESUME in the ID scan mode, press 0-9
(scan list number), then press 0-9 (memory position). For
example, to move to scan list 4, memory position 10,
press: HOLD/RESUME, 4, 0, HOLD/
RESUME.
multi-track
Your scanner allows you to track more than one trunking
system at a time. Here are some highlights of this feature:
• You can actually track up to 10 trunking systems at one
time.
• You can trunk scan, or search and scan conventional
frequencies at the same time.
• You can program conventional frequencies in the same
bank as trunking systems.
After the scanner fi nishes checking a trunked system for
activity, it will conventionally scan the other frequencies
in the bank (remember, only trunking frequencies are
programmed in trunk mode).
Note Note