Radio Shack PRO-2051 - Manual (Page 23)

23
Beyond the Basics
Write down your locked-out channels and put them in a
convenient place in case you need to restore them.
memory lock
To avoid accidentally programming frequencies and talk
group IDs, you can lock the memory with
MEMORY LOCK .
Press FUNC + M-LOCK to activate this feature. M-LOCK
appears on the display. If you press E to program memory,
Prg-Loc appears. To deactivate memory lock, press
FUNC + M-LOCK again.
restoring a locked-out channel in hold mode
1. Press HOLD/RESUME and enter the channel number you
want to restore by using the keypad, then press
HOLD/RESUME.
2. Press L/O to unlock the channel. L/O disappears.
restoring all locked-out channels
You can restore all locked-out channels in a bank only when
a bank is selected for scan. If you have deselected a bank and
you want to restore all of its locked-out channels using the
steps below, you must repeatedly press PVT until PRIVATE
appears and then enter the number of the bank on the
keypad.
Make sure the scanner is set to hold mode before
restoring all locked-out channels.
1. Press HOLD/RESUME.
2. Hold down L/O for about 2 seconds. The scanner beeps
twice when all channels have been restored.
Note Note
Note Note