Raymarine ST60 Tridata - Manual (Page 17)

Chapter 1: Operation 5
Trip
The trip key gives access to log, trip, water temperature and timer
displays, as shown in the Using the trip key illustration.
Log
The Log screen shows the total distance covered by the vessel since the
instrument was fitted.
D4415-2
Trip
Water
temperature
Count-up
timer
Race start
timer 2
Race start
timer 1
Log
trip
trip
trip
trip
to decrease the value
reset
to increase the value
To set a different race start timer value, press
reset and
momentarily
To enter/leave
adjust mode, press
trip reset and
momentarily
To enter/leave
adjust mode, press
trip
trip
trip
trip
or for 1 s to reset timer to start value.
Press
either momentarily
to start timer, or for lap time (when running)
reset
Using the trip key
81040_1.book Page 5 Thursday, November 7, 2002 10:21 AM