Raymarine ST60 Tridata - Manual (Page 23)

Chapter 2: Maintenance and Faultfinding 11
CAUTION:
If you need to remove the Speed transducer insert, have the
transducer bung to hand and secure it in the transducer body
immediately after the insert has been removed, to prevent excessive
ingress of water.
Technical support
Raymarine provides a comprehensive customer support service, on the
world wide web and by telephone help line. Please use either of these
facilities if you are unable to rectify a problem.
World wide web
Please visit the Customer Support area of our web site at:
www.raymarine.com
As well as providing a comprehensive Frequently Asked Questions
section and servicing information, it also gives e-mail access to the
Raymarine Technical Support Department and a details of the locations
of Raymarine agents, worldwide.
Telephone help line
If you do not have access to the world wide web, please call:
1-800-539-5539, extension 2444 or
(603) 881-5200 extension 2444
Failure of group of
instruments in SeaTalk
chain. SeaTalk cabling or
connector problem. Check the security of SeaTalk
connections between functioning and
non-functioning instruments.
LAST flashes or dashes
displayed continuously
(depth greater than 3 feet). Depth transducer or
connection problem. Check depth transducer cable and
security of transducer connections.
LAST flashes while under
way. Aerated water
Boat wake
Prop wash etc Ensure readings stabilise when clear of
disturbed water.
Fault Cause Remedy
81040_1.book Page 11 Thursday, November 7, 2002 10:21 AM