Ricoh 170 / 180 - Manual (Page 140)

5. After playing back all received mes-
sages, the beep tone is transmitted 5
times and it will return to standby mode.
Clearing All the All Received M essages
1. Make sure that the machine is in TAM mode.
2. Press the No key. 01 MESSAGE(S) EXIT/i
ERASE-C >/>>-k
3. Press the Clear key. Y/N
ERASE ALL MESSAGES?
4. Either:
❐ Erase all received messages:
Press the Yes key.
❐ Otherwise: Press the No key
5. Press the Function key.
Cancelling the TAM M ode
1. Press the Function key and
6,2,2,2,2,6,2 using the ten keypad. Then
press the Yes key.
Y/NEXT k
SELECT LINE
2. Press the
k
key until "SELECT AUTO
RECEIVE MODE" is displayed.
Y/NEXT k
SELECT AUTO RECEIVE
3. Press the Yes key. PRIORITY Y/j k
AUTO k TAM
4. Press the
j
and the
k
keys to switch
TAM Mode off.
PRIORITY Y/j k
k AUTO TAM
NOTE: If "ERASE ALL MESSAGES?" is displayed, you have not listened to all re-
ceived messages yet. Press the No key and and listen to them.