Ricoh 170 / 180 - Manual (Page 75)

Preventing a Wrong Connection ( ID Transmission)
This feature helps to stop you from accidentally sending a fax messages to
terminal that is outside your network. The ID codes of the communicating
machine are checked. If they are not the same the communication is stopped.
The ID code is the same as the polling ID.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
❐
At this time, you can print a User Parameter List if
you press the Start key.
2. Press the Yes key. then press the
j
key
until the settings for switch 6 are shown.
The setting that you need to change is
that for digit 2.
KPAD/Y/j k
SWITCH 06: 0000 0000
3. If you wish to change the setting, press
2 using the ten keypad.
KPAD/Y/j k
SWITCH 06: 0000 0100
4. Finish: Press the Yes key, then press
the Function key.
Cross-reference Polling ID:See page 76
Digit 2
0: ID Transmission Off
1: ID Transmission On
TRANSMISSION
64