Ricoh 170 / 180 - Manual (Page 65)

If you wish to switch Substitute Reception on or off, do the following. If you need
more information about the User Parameter Settings adjustment procedure (see
page 102).
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
2. Press the Yes key. Press the
k
key until
the settings for Switch 05 are displayed.
KPAD/Y/j k
SWITCH 05:0000 0000
3. Change the settings of digit 0 and 1.
The meanings of these setting are as
follows:
KPAD/Y/j k
SWITCH 05:0000 0000
* indicates the factory settings.
Digit Purpose
0 Substitute Reception 0: Off 1: On *
1
Reception to memory when no
RTI or CSI identifiers were received
from the other party
0 Enabled 1: Disabled *
4. If you wish to change the setting, press
0 or 1 using the ten keypad.
5. Press the Yes key, then press the Function key.
Digit 1 0
RECEIVING FAX MESSAGES
54