Ricoh 170 / 180 - Manual (Page 66)

CHANGING RECEPTION MODE
This feature is useful because it lets you switch the reception mode quickly for
just one call. For example, if you are in Telephone mode and an incoming call
turns out to be a fax, you can instantly change over to Fax Mode and receive the
message. Similarly, you may change:
❐ From Fax mode to Tel mode
❐ From Auto Mode to Fax mode
❐ From Tel mode to Fax mode
NOTE: ❐ This feature is only available when you are using Tone dial.
❐ In Asian, you can not swith over Fax Mode to Telephone Mode.
❐ In USA, you can switch over Fax Mode to Telephone Mode. After
talking you can switch back Telephone mode to Fax mode.
Switching Reception Mode Switch Over On/off
1. Press the Function key and
6,2,2,2,2,6,3, using the ten keypad, then
press the Yes key.
SETTING? Y/j
PRINT LIST j
❐
At this time, you can print a User Parameter List
if you press the
k key, then press the Start key.
2. Press the Yes key. Then press the
k
key
until the settings for Switch 07 are dis-
played.
KPAD/Y/j k
SWITCH 07: 0000 0000
❐
The setting which is in the display is the current
setting (normally seen in a machine just
delivered from the factory).
3. The setting that you need to change is
digit 5. If you wish to change it press 5
using the ten keypad.
KPAD/Y/j k
SWITCH 07: 0010 0000
4. Finish : Press the Yes key and the Function key.
Using Reception Mode Switchover
1. Make sure that the machine is in One Touch Change Over Mode.
2. After ringing, hang up the handset, then press 2 twice on the separate
handset’s keypad.
3. The machine automatically changes the reception mode.
Digit 5
0: Switch Over Off
1: Switch Over On
B
A
S
IC OPERA
T
IO
N
55