Ricoh 170 / 180 - Manual (Page 30)

2 Press the
k
key until the screen is as
shown opposite.
Y/NEXTk
SET RTI
3. Press the Yes key. RTI ABC
llllllllllllllllll
4. Input the RTI that you will be using.
Example: XYZ COMPANY
RTI ABC Y /j k
XYZ COMPANY llllllll
NOTE: This name cannot be more than
20 characters long.
5. Press the Yes key to store your setting.
If you are still in the RTI setting, press
the Yes key again.
6. Either :
❐ Select another feature : Go to step 2.
❐ Finish : Press the Function key.
TTI (Page Header)
Your TTI is printed ay the other end at the top of each page received from your
machine. The TTI can have up to 32 characters (numbers and letters can be
used, along with some symbols). Program something easy to recognize, such as
your name, company name or department name within the company.
1. Either Y/NEXTk
SET TTI
❐ If you have just entered the RTI in
the previous procedure, press the
Yes key.
❐ Press the Function key and
6,2,2,2,2,6,1 using the ten keypad,
then press the Yes key. Press the
k
key until the screen is as shown
above, then press the Yes key.
2. If you have already entered an RTI, the
TTI will be copy of this name.
TTI CHANGE? Y/N
XYZ COMPANYlllllllll
❐ If this TTI is correct: Press the No
key then go to step 5.
❐ Otherwise : Press the Yes key.
Inputting and editing are explained on page
100.
INS
T
A
LL
TING THE
M
A
CHINE
SOME ITEMS MUST BE PROGRAMMED FIRST
19