Ricoh 170 / 180 - Manual (Page 31)

3. Input the TTI that you will be using or
edit the TTI that is already there.
Example: XYZ CO. HEAD OFFICE
TTI ABC Y /N
XYZ CO.HEAD OFFICElll
NOTE: This cannot be more than 32
characters long.
4. Press the Yes key to store your setting. If you are still in the TTI setting, press
the Yes key again.
5. Either:
❐ Enter the CSI next: Go to step 1 in the CSI Programming procedure.
❐ Finish : Press the Function key.
CSI (Telephone number display)
Your CSI appears on the other party’s operation panel during communication
instead of your RTI, if the other party’s machine is another manufacturer’s
product. The CSI can have up to 20 characters (only numbers and spaces can be
used). Enter your fax machine’s telephone number, because some features of
your machine may not work if the CSI is not the same as the telephone number.
1. Either: Y/NEXTk
SET CSI
❐ If you have just entered the TTI in
the previous procedure, press the
Yes key.
❐ Press the Function key and
6,2,2,2,2,6,1 using the ten keypad,
then press Yes key. Press the
k
key until the screen is as shown
above, then press the Yes key.
2. Press the Yes key. CSI KPAD
llllllllllllllllll
3. Input your telephone number using the
ten keypad.
Example: 4712319266
CSI KPAD/Y/N
471231-9266lllllllll
NOTE: This cannot be not more than
20 characters long.
❐
You may wish to input a "+" sign, a common prac-
tice in Europe to signify your international dial ac-
cess code. Press the Quick Dial Key 09 until the
"+" appears at the cursor.
4. Press the Yes key to store your setting.
5. Finish : Press the Function key.
Inputting and editing are explained on page
100.
Inputting and editing are explained on page
100.
SOME ITEMS MUST BE PROGRAMMED FIRST
20