Ricoh CAPLIO G4 WIDE - Manual (Page 119)

Chapter 1 Section 6 Changing Camera Settings
119
OFF (Photo not displayed for confirmation)
1 Minute (Default)
2 Seconds
3 Seconds
To change Confirmation Time, follow the
steps below.
Turn the Mode Dial to 1 1 1 1 (Setup Mode).
The Setup Screen appears.
Press the " " " " button to select [LCD CON-
FIRM.].
Press the #$ #$ #$ #$ buttons to select the
desired setting.
This setting will be used for shooting until you change
it.
Changing Image Confirmation Time (LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is displayed for a moment so you
can check it.
At purchase, Confirmation Time is set to one second, but this can be changed.