Ricoh CAPLIO G4 WIDE User Manual
Page 60
Chapter 1 Section 3 Using Special Features for Improved Photography
60
If you select
(One Push)
Press !"
!"
!"
!" to select
(One Push).
Point the camera at a piece of paper or
something white under the lighting condi-
tions for your picture.
Press the $
$
$
$ button.
White Balance is set.
Press the O
O
O
O button.
White Balance settings are completed and the symbol
appears in the upper left of the screen.
This setting will be used for shooting until you change
it.
If you press the $ button in step
, the screen
refreshes to show the White Balance settings made. If
the result is not as expected, repeat steps
and
to change the settings as many times as required.
• In Auto Mode, white balance may not be adjusted correctly for a mostly dark subject. In this case, add something white as the subject.
• When shooting with flash, white balance may not be adjusted correctly in Daylight, Overcast, Tungsten light, or One Push mode. In this
case, switch to Auto Mode for shooting with flash.
When shooting with flash in a mode other than Auto, the white balance may not be adjusted correctly.