Ricoh CAPLIO G4 WIDE - Manual (Page 56)

Chapter 1 Section 3 Using Special Features for Improved Photography
56
Exposure compensation setting can be
adjusted by using the ADJ. Button or using
the Shooting Menu.
Using the ADJ. Button
(Exposure)
To change the exposure compensation set-
ting using the ADJ. Button, follow the steps
below.
Turn the Mode Dial to 5 5 5 5 (Shooting Mode).
Press the ADJ. Button.
The Exposure Compensation bar appears.
Press the !" !" !" !" buttons and specify a
value.
Moving it to the - (minus) side makes darker. Moving it
to the + (plus) side makes it brighter. You can also
press the shutter button in this state.
Press the O O O O button.
Exposure Compensation settings are completed and
the setting value appears in the right-hand portion of
the screen.
This setting will be used for shooting until you change
it.
• At purchase, the exposure compensation is set to 0.0. The setting value does not appear when the default value is set.
• If your subject is not centered when shooting against light, the camera does not recognize it in the backlight condition. In this case,
adjust the exposure compensation setting.