Ricoh CAPLIO G4 WIDE - Manual (Page 99)

Chapter 1 Section 4 Playing Back/Deleting Still Images, Movies, and Sounds
99
To view still images and/or movies on a tele-
vision, follow the steps below.
Securely connect the AV cable to the
Video In terminal on the television.
Make sure the power is off.
Securely connect the AV cable to the
Video Out terminal.
Set the television to "Video" mode. (Set
the input to "Video".)
For details, please refer to the operation manual for
the television.
Turn the camera's Mode Dial to 6 6 6 6 (Play-
back Mode).
Turn your camera on by pressing the
power button.
• If you connect the AV cable to your video recorder's In terminal, you can record what you have shot onto video.
• Your camera is set to NTSC playback format (used in Japan and other countries) for use with television equipment, etc. If the equip-
ment you want to connect to uses PAL format (used in Europe and elsewhere), then switch your camera to PAL format in the Setup
Menu before connecting.
• Connecting the AV cable to the camera turns off the LCD monitor display and the speaker output.
Viewing on a Television
You can also view the still images and movies you have taken on a TV screen. The camera displays
everything on the TV screen just as on its LCD Monitor.
To use your television for viewing, connect your camera to the television with the AV cable that came
with your camera.