Ricoh CAPLIO G4 WIDE - Manual (Page 12)

Chapter 1 Section 1 Getting Started
12
Setting up the AC Adapter
Make sure the camera's power is off.
Open the battery/card cover.
The cover slides open in two steps.
First slide the cover toward the face of the camera,
then lift it to expose the battery compartment.
Insert the AC Adapter Battery .
Open the power (DC input) cable cover
and take the cable out.
Close the battery/card cover and slide it
back into place.
Plug the power cord into an outlet.
• Be sure to firmly attach cables and plug in cords.
• When you are not using the camera, unplug the AC Adapter from the camera and the power outlet.
• While in use, if you detach the AC Adapter or unplug it from the outlet, data may be lost.
Using the AC Adapter
When shooting or viewing still images for a long time, or when connecting to your computer, use of the
AC Adapter (sold separately) is recommended.
Battery for use with
the AC Adapter
AC Adapter