Ricoh CAPLIO G4 WIDE - Manual (Page 38)

Chapter 1 Section 2 Basic Shooting
38
To select a Scene Mode, follow the steps
below.
Turn the Mode Dial to 4 4 4 4 (Scene Mode).
The scene-selection screen appears.
Press the !" !" !" !" buttons to select the mode
you want to use.
Press the O O O O button.
The camera switches to the Scene Mode shooting
screen and the symbol of the Mode you selected is
displayed in the top of the screen.
If you press the ! button, the scene selection screen
is displayed and you can change the mode.
If you press M button, the shooting menu
appears.
Press the shutter release button.
• If you switch the Mode Dial to 5 (Shooting Mode), you can use Shooting Mode as usual.
• If you return to Scene Mode again, the scene-selection screen is displayed again.
• In Text Mode, image size cannot be set to 640x 480 pixels. If a photo is taken at the 640 × 480 setting, the size automatically becomes
1280 × 960 pixels.
• When you want to change PIC QUALITY/SIZE in PORTRAIT/SPORTS/LANDSCAPE/NIGHTSCAPE/HIGH SENSITIVITY Modes, see
P.67.
• To make changes to density in TEXT Mode, see P.84.
• To change the focus setting to manual or other, see P.71.
• To make changes to the White Balance settings, see P.58.
TIFF File
An image shot in TEXT Mode is stored in the TIFF file format. A TIFF file is smaller than a JPEG file in TEXT Mode only.