Ricoh CAPLIO R4 - Manual (Page 116)

114
Adjusting the Brightness of the LCD Monitor
(LCD BRIGHTNESS)
To adjust the brightness of the LCD monitor, follow the steps below.
1.
Display the SETUP menu.
For the operating procedure, see P.111.
2.
Press the " button to select [LCD
BRIGHTNESS] and press the $
button.
The LCD Brightness Adjustment bar
appears.
3.
Press the !" buttons to adjust
the brightness.
Moving it toward makes it darker.
Moving it toward makes it brighter. The
brightness of the screen behind the bar
changes as you adjust the setting.
4.
When you reach the desired
brightness, press the C/D
button.
The display returns to the SETUP screen.
This setting is used until it is changed.
Note
When shooting, press and hold down the DISP. button to maximize the LCD brightness.
When the brightness is at the maximum setting, holding the DISP. button down returns the
brightness to the level set in [LCD BRIGHTNESS]