Ricoh CAPLIO R4 - Manual (Page 128)

126
Displaying a Settings Change Warning
(SHTG STGS WARNG.)
If the initial settings are changed for the following functions, you can
set the camera to have the icon of that function blink and to display a
warning message about the function with the changed setting for
about 5 seconds when the camera is turned on.
• White balance
• Focus
• ISO setting
• Exposure compensation
• Time exposure
If you operate a camera button while an icon is blinking, the icon
stops blinking and lights steadily.
If you operate a camera button while the warning message is
displayed, the message disappears.
To set whether to enable (ON) or disable (OFF) the settings change
warning, follow the steps below.
1.
Display the SETUP menu.
For the operating procedure, see P.111.
2.
Press the " button to select [SHTG STGS WARNG.] and
press the $ button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the C/D or # button.
5.
If you pressed the # button in
Step 4, press also the C/D
button.
This setting is used until it is changed.
Available Settings
OFF
ON *Default setting