Ricoh CAPLIO R4 - Manual (Page 82)

80
Changing the Exposure (EXPOSURE COMP.)
The exposure setting enables you to select the brightness level for your picture.
Normally, if your subject is centered, backlight compensation is automatically
activated, and you can shoot with the correct exposure.
However, in the following cases, or when you intentionally want to change the
exposure, you can adjust the exposure setting. Exposure can be specified in
the range from -2.0 to +2.0. Setting the level higher (+) makes the picture
brighter and lower (-) makes the picture darker.
For backlighting
When the background is particularly bright, the subject will appear dark
(underexposed). In this case, set the exposure level higher (+).
When your subject is whitish
The entire picture will turn out dark (underexposed). Set the exposure level
higher (+).
When your subject is darkish
The entire picture will turn out bright (overexposed). Set the exposure level
lower (-).
The same happens when you take a photo of a subject in a spotlight.
1.
Switch the Mode Selector to 5.
2.
Press the ADJ. button.
3.
Press the #$ buttons until the Exposure Compensation bar
appears.
4.
Press the !" buttons set the exposure setting.
You can also press the shutter release button.
5.
Press the C/D button.
The Exposure Compensation setting is
completed and the setting appears on
the screen.
Note
When shooting in particularly bright places, you may not be able to correct the exposure level.
In that case, the [!AE] symbol will appear on the screen.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways to change the exposure setting with the ADJ. button.
To use the Shooting Setting menu, see “Using the Shooting Setting Menu” (P.61).