Ricoh CAPLIO R4 - Manual (Page 124)

122
Setting the Date and Time (DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1.
Display the SETUP menu.
For the operating procedure, see P.111.
2.
Press the " button to select
[DATE SETTINGS] and press the $
button.
3.
Press the !"#$ buttons to set
the year, month, date and time.
You can press and hold down the !"
button to quickly raise or lower the
setting.
4.
In [FORMAT], choose the date and
time format.
5.
Check the information on the
screen and then press the
C
/D button.
Once you have set the date and time,
the display returns to the SETUP menu.
Note
• If the battery is removed for more than one week, the date and time settings will be lost.
These settings must be made again.
• To retain the date and time settings, load a fully charged battery for more than two hours.