Ricoh CAPLIO R4 - Manual (Page 93)

91
Using
th
e
Va
rious S
hoot
ing
and
Playbac
k F
unc
tions
CONT.
7.
Compose your picture and then press and hold the shutter
release button.
Pictures continue to be taken for as long as you hold down the shutter
release button.
8.
Release your finger from the shutter release button to stop
taking pictures.
To playback consecutive images shot in Multi-Shot mode, switch the
camera to Playback Mode (P.43) and select the still image you want to
play back with the #$ buttons.
S-CONT (S Multi-Shot)
7.
Compose your picture and then press the shutter release
button.
16 pictures are taken automatically.
M-CONT (M Multi-Shot)
7.
Compose your picture and then press and hold the shutter
release button.
The camera memorizes the scene while you hold down the shutter
release button.
8.
Release your finger from the shutter release button.
The camera stops shooting and the 16 still images (in the previous 2.2
seconds) are recorded as one still image.
Note
• To return to normal single-image shooting, follow Steps 1 to 3, select [OFF] in Step 4, and
press the M/O button.
• In M-CONT Mode, if you release the shutter release button within 2.2 seconds from the
time you first pressed it, the shots from the time you pressed the shutter until you released
it will be recorded (the number of consecutive shots will be less than 16).
• The flash is turned off.
• During Multi-Shot Mode, the LCD monitor is turned off.
• The camera shake correction function cannot be used during Multi-Shot shooting. If Multi-
Shot shooting is set while the camera shake correction function is turned on, E changes
to F.