Ricoh CAPLIO R4 - Manual (Page 88)

86
Changing Shading for Shooting Text
(DENSITY)
You can change the shading of text for shooting with [TEXT MODE]
in Scene Mode.
You can select from [DEEP], [NORMAL] and [LIGHT].
1.
Switch the Mode Selector to 5.
2.
Press the SCENE button.
The Scene Mode selection screen
appears.
3.
Press the !" buttons to select
[TEXT MODE] and then press the
C
/D button.
4.
Press the ADJ. button.
The text density menu appears.
5.
Press the !" buttons to select
the desired density setting.
You can also press the shutter release
button.
6.
Press the C/D button.
The text density setting is completed.
The text density setting does not appear on the screen. The setting is
used for shooting until it is changed.
Reference
For information on how to shoot text, see P.39.
To change the setting, use either the Shooting Setting menu or the ADJ. button.
This section explains easy ways to change the shading setting with the ADJ. button.
To use the Shooting Setting menu, see “Using the Shooting Setting Menu” (P.61) and “D. Available Menu
Items By Mode” (P.173).