Ricoh CAPLIO R4 - Manual (Page 134)

132
Registering the Power-on Settings
(REG. MY SETTINGS)
The My Setting function allows you to make your desired settings to
be used at power-on. For example, when a digital camera is used in
common by multiple persons, each person can use the camera
without regard to the settings made by the person who used the
camera previously because the camera settings are restored to the
administrator settings each time the camera is turned on.
Two types of my settings can be registered.
Registering My Settings
To register the current camera settings as my settings, follow the
steps below.
1.
Change the camera settings to the settings to be registered
as my settings.
2.
Display the SETUP menu.
For the operating procedure, see P.111.
3.
Press the " button to select [REG.
MY SETTINGS] and press the $
button.
A confirmation message appears.
4.
Select [SETTING1] or [SETTING2]
and press the C/D button.
The current camera settings will be
registered.
If you do not want to register them, press
the DISP. button.
5.
Press the C/D button.