Ricoh CAPLIO R4 - Manual (Page 72)

70
Changing the Edge Quality of Still Images
(SHARPNESS)
You can change the edge quality of your still images to either sharp
or soft.
1.
Switch the Mode Selector to 5.
2.
Press the C/D button.
The Shooting Setting menu is displayed.
3.
Press the " button to select [SHARPNESS] and press the $
button.
4.
Press the !" buttons to select
the desired setting.
5.
Press the C/D or # button.
The Sharpness setting is completed.
6.
If you pressed the # button in Step 5, press also the
C
/D button.
The Shooting Setting menu disappears
and the setting appears on the screen.
The setting is used for shooting until it is
changed.