Oki FAX 5050 - Manual (Page 21)

Introduction 9
17 Alarm indicator: This indicator glows red and an alarm
sounds to notify you of any problem that occurs. Check
the display panel for an explanation of the problem. To
turn the alarm indicator off, press the Stop key and correct
the problem.
1 8 Stop key: This key cancels the operation currently in
progress and turns off the Alarm Indicator. After loading
paper, installing a new toner cartridge, or correcting an
alarm condition, press this key to turn off the Alarm
Indicator. While you are programming, pressing the Stop
key takes you back step-by-step through the programming
functions you have already selected.
19 Start key: Press this key to initiate the operation indicated
on the display or to confirm information you have
entered into the display.
20 Plus key: In addition to its function as a programmable
One Touch key, this key is used for chain dialing, which
allows you to dial a number using any combination of
One Touch keys, Auto Dial numbers, and the numeric
keypad. When programming a chain dial number into a
One Touch key or Auto Dial number, press the Plus key
at the end of the first part of the number to indicate that
this is a chain dial number. See page 29 for details.
21 Space key: Use this key on the One Touch Keypad to enter
spaces while programming. Unlike the Pause and Hyphen
keys, spaces are used for easier reading only and have no
effect on dialing.
22 Pause key: Use this key on the One Touch keypad to enter
automatic 3-second pauses in dialing when programming
telephone numbers. For example, you can use this key to
tell your machine to wait for an outside or international
line to open. Pauses in telephone numbers are marked by
a “P” symbol.
Of5050hw.pm6 4/15/98, 9:26 AM 9