Oki FAX 5050 - Manual (Page 24)

12 Introduction
Installation
Installation 12
Getting Started
To install your new OKIFAX, follow the instructions
from Unpacking to Setting the Fax Identification. You
must complete these steps for your OKIFAX to operate
properly.
If you have purchased an option package for your
OKIFAX, refer to the documentation you received with
that option for installation instructions.
Where to Install Your OKIFAX
■ Place your OKIFAX in a dust-free location away from
direct sunlight.
■ Allow several inches on each side of the machine to
ensure adequate ventilation.
■ Make sure that both power and telephone outlets are
available nearby.
■ Choose a location where the relative humidity is between
20% and 80%, and where the temperature is between
50°F (10°C) and 92°F (32°C).
Unpacking
Before you begin, be sure that all the items listed below
are included in your package.
■ OKIFAX 5050
■ Toner cartridge (wrapped)
■ Image drum cartridge (inside machine)
■ Power cord
■ Telephone line cord
■ Document stacker tray
■ Quick Start Guide
Refer to the illustrations in the Component Identification
chapter.
Note: If any items are missing, contact your dealer
immediately. Keep your packing materials and carton in
case you ever need to ship or transport the unit.
Of5050hw.pm6 4/15/98, 9:26 AM 12