Oki FAX 5050 - Manual (Page 53)

Faxing: Advanced Operations 41
1 0 Select a location. Refer to the following instructions.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal
the numeric keypad telephone.
1 1 Press the Start key. Your OKIFAX begins waiting for the
time and date you have set before feeding the document
and sending the fax.
Sending a Delayed Fax From Memory
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The display
shows DELAYED TX and today’s date.
4 If the transmission is to occur on the same day, skip to
step 6. Otherwise, press the No
ᮣ key. The display shows
PRG. START DATE 0-9.
5 Using the numeric keypad, enter the date you wish the
transmission to begin—up to three days in advance.
6 Press the Yes ᮤ key. The display shows PRG. START
TIME 0-9.
7 Using the numeric keypad, enter the time you wish
the transmission to begin, in 24-hour format—8:00
AM
is 08:00; 8:00 PM is 20:00.
8 Press the Yes ᮤ key. The display shows FEEDER TX.
9 Press the No ᮣ key.
10 Select a location. Refer to the instructions below.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
A group Using the numeric keypad, press the #
key, then enter the number of the group
you want to use.
11 Press the Yes ᮤ key to confirm your selection. The
display shows SELECT LOCATION(S).
12 Repeat Steps 11 and 12 as often as necessary to
continue selecting locations.
13 When you are finished selecting locations, press the
No
ᮣ key at the SELECT LOCATION(S) message.
14 If you have selected multiple locations, your OKIFAX
asks if you want to confirm your selections with a
printed report before proceeding. If you do, press the
Of5050hw.pm6 4/15/98, 9:32 AM 41