Oki FAX 5050 - Manual (Page 60)

48 Faxing: Advanced Operations
2 Press the 5/Polling One Touch key. The display shows
POLLING RX, SELECT LOCATION.
3 Select a location. Refer to the instructions below.
To Select Using Do This
A One Touch key Press the One Touch key.
An Auto Dial number Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
4 Press the Start key. Your OKIFAX begins polling the remote
fax machine.
Dual Access
Your OKIFAX’s dual access feature allows you to load
and prepare to transmit a document while your fax
machine is receiving or sending another fax from
memory. This feature increases your productivity and
reduces the time you spend waiting for operations to
finish.
Once you have loaded a document and the display
shows SELECT LOCATION, your OKIFAX is ready for
you to prepare the next transmission.
What You Can Do While Sending a Fax
After your OKIFAX has finished scanning a document
into memory—and while it is transmitting from
memory—you can:
Ⅲ Load another document and prepare it for transmission.
You can continue to load documents as long as memory
is available in your OKIFAX. When the first transmission
is complete, the next fax will automatically be sent.
Ⅲ Make copies.
What You Can Do While Receiving a Fax
While your OKIFAX is receiving a fax, you can:
Ⅲ Load another document and prepare it for transmission.
You can continue to load documents as long as memory
is available in your OKIFAX. When the fax has been
received, the faxes you have loaded will automatically
be sent.
Ⅲ Continue to receive faxes while earlier received mes-
sages are printing, if your OKIFAX is set to receive faxes
into memory.
What You Can Do While Making Copies
While your OKIFAX is making copies, you can:
Ⅲ Continue to receive faxes while copies are printing, if your
OKIFAX is set to receive faxes into memory.
Of5050hw.pm6 4/15/98, 9:32 AM 48