Oki FAX 5050 - Manual (Page 67)

Customizing 55
Changing Your Dial Parameter Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes ᮤ key until the display shows the dial
parameter you want to change.
5 Repeatedly press the No ᮣ key until the setting you want
appears in the display.
6 Press the Yes ᮤ key to confirm your selection. The name
of the next dial parameter setting appears in the display.
7 Press the Select Function key to finish.
Service Function Settings
In many cases, service function settings greatly change the
way your OKIFAX operates. To change any of these
settings, contact your Authorized OKIFAX Dealer.
Service Function Settings List
LONG DOC. TX: Normally OKIFAX does not scan
documents longer than 14 inches (360 mm). When this
function is on, your OKIFAX can scan and transmit
documents of any length for up to one hour.
MDY/DMY: This function specifies how OKIFFAX displays and
prints the date: month/day/year or day/month/year.
TIME/DATE PRINT: This function specifies how the time and date
are printed on the fax messages you transmit. Available
settings are: do not print date and time, print date and time at
the top of the first page only, and print date and time at the
top of every page.
TSI PRINT: When this function is on, the phone number of the
sending fax machine prints at the top of each page of the
message.
NO TONER MEM.RX: When this function is on, your OKIFAX
automatically receives messages in memory when it is low on
toner.
Of5050hw.pm6 4/15/98, 9:32 AM 55