Oki FAX 5050 - Manual (Page 34)

22 Installation
1 1 Press the Select Function key to finish.
Setting the Language
Your OKIFAX 5050 comes with two languages in-
stalled—English and Spanish, French or Portuguese, de-
pending on where you bought your unit—which appear
on the display and in reports. Follow the instructions be-
low to switch languages.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The
display shows 1:FUNC. PROGRAMMING.
3 Press the Yes ᮤ key. The display shows
FUNCTION NO. [ ]
ENTER 01-23.
4 Using the numeric keypad, enter 15. The display shows
USER LANGUAGE.
5 Press the No ᮣ key to switch to the other installed
language.
6 To accept the language change, press the Yes ᮤ key.
7 Press the Select Function key to finish.
6 Press the Start key to save your entry.
7 Enter your Sender ID. This is a descriptive title up to 32
characters long. Refer to the instructions below.
To Do This Use
Enter numbers Numeric keypad (press once)
Enter spaces 14/Space One Touch key
Enter hyphens Hyphen key
Enter alphabet characters Locate the character you want on the
numeric keypad. Press that key repeatedly
until the character appears on the display
Enter a unique character Press the 0/Unique key repeatedly until
the character you want appears on the
display. The following characters are
available: ! # & ‘ ( ) * + , - . / : ; = ? · д Я
с ц ь Ж Е Ш ж е ш
Enter two successive Press the No ᮣ key to move to the
letters/numbers using next character
the same key
Move the cursor to Yes ᮤ and No ᮣ keys
make corrections
8 Press the Start key to save your entry. The display shows
NO=<CALL BACK NO.>.
9 After the display clears, use the numeric keypad to enter
the telephone number for call back messages. Enter up to
20 characters.
Tip: Use the 14/Space One Touch key to enter spaces.
1 0 Press the Start key to save your entry.
Of5050hw.pm6 4/15/98, 9:31 AM 22