Oki FAX 5050 - Manual (Page 80)

68 Problem Solving
1 Wait until the time, date and answering mode appear on the
display. Then press the Select Function key.
2 Press the 7/Counter Display One Touch key. The display
shows DRUM COUNT.
3 Press the Yes ᮤ key to clear the image drum unit counter.
4 Press the Select Function key to finish.
Display Panel Messages
This section lists the status and error messages that may
appear on the OKIFAX’s display panel, and explains what
they mean and how to correct any problem they indicate.
Note: The red Alarm indicator lights when there is an error
condition.
Normal Display
02:13 [FAX]
Under normal operating conditions, the top line of the
display shows the time and the answering mode—FAX,
TEL, T/F, MEM, FWD, or TAD.
7 Close the copy stacker and push down until you hear the copy
stacker click into place. Besure that the cover latches on both
sides.
1 ABC 2 DEF 3
GHI 4 JKL 5 MN 6
PRS 7 TUV 8 WXY 9
* OQZ 0 #
AUTO REC SEARCH SELECT FUNCTION AUTO DIAL HYPHEN REDIAL COPY HOOK
V. REQUEST
PHOTO EX FINE FINE STD LIGHT NORMAL DARK ALARM STOP STAR T
8 Close the document table.
1 ABC 2 DEF 3
GHI 4 JKL 5 MN 6
PRS 7 TUV 8 WXY 9
* OQZ 0 #
AUTO REC SEARCH
SELECT FUNCTION AUTO DIAL HYPHEN REDIAL
COPY HOOK
V. REQUEST
PHOTO EX FINE FINE STD LIGHT NORMAL DARK ALARM STOP STAR T
9 Follow the instructions in the next section to reset the drum
counter.
Resetting the Drum Counter
Important : Reset the drum counter only when you have
finished installing a new image drum. You can only reset
the counter when the "Change Drum Soon" message is on
the display.
Of5050hw.pm6 4/15/98, 9:44 AM 68