Onkyo TX-SR876 - Manual (Page 119)

119
Advanced Setup
—Continued
Power Control
To link the power functions of -compatible
components connected via HDMI, select “Enable”.
Notes:
• The
“Power Control” setting can be set only when the
above “Control” setting is set to “Enable”.
• HDMI power control only works with -com-
patible components that support it and may not work
properly with some components due to their settings
or compatibility.
• When set to “Enable”, power consumption will
increase.
• Refer to the connected component’s instruction man-
ual for details.
TV Control
Set to “Enable” when you want to control the AV
receiver from an
-compatible TV that is con-
nected to HDMI.
Notes:
• Set to
“Disable” when the TV is not compatible or
when it is unclear whether the TV is compatible or
not.
• The “TV Control” setting can be set only when the
above “Control” and “Power Control” settings are both
set to “Enable”.
• Refer to the connected component’s instruction man-
ual for details.
Network
See “Network Settings” on page 128.
Lock
With this setting, you can protect your settings by lock-
ing the setup menus.
Locked: Setup menus locked.
Unlocked: Setup menus unlocked (default).
When Locked is selected, only this “Lock Setup” item
can be accessed.
Disable: Power Control disabled.
Enable: Power Control enabled.
Disable: TV Control disabled.
Enable: TV Control enabled.
Note:
After changing the settings of the
“Control” , “Power
Control” , or “TV Control” , turn off the power to all
connected pieces of equipment and then turn on
again. Refer to the User’s Manuals for all connected
pieces of equipment.
When linking to a TV that conforms to the CEC
standard, the “Monitor Out” setting must be set to
“HDMI Main”.
Lock Setup